Here is a step-by-step guide of how to make your own Pike / Marker Floats.
There is also a guide to making the Vein/flight.
1. The Equipment
2. Shapeing the float with the sharp knife
3. Shapeing the float #2
4. Sanding the float
5. Shaped / sanded and ready for painting
6. Drilling hole for the swivel.
7. Inserting & glueing in the swivel.
8. Painting on the white undercoat.
9. Sanding the first white coat.
10. Painting on the flouro coat.
There is also a guide to making the Vein/flight.
1. The Equipment
2. Shapeing the float with the sharp knife
3. Shapeing the float #2
4. Sanding the float
5. Shaped / sanded and ready for painting
6. Drilling hole for the swivel.
7. Inserting & glueing in the swivel.
8. Painting on the white undercoat.
9. Sanding the first white coat.
10. Painting on the flouro coat.
Kommentera